Rapid-Air® Mattress System- Model 4300 & Rapid-Air® Plus Model 4300Low Air Loss Rapid-Air® Alternating Air Flotation Mattress System |
|
| The Rapid-Air® and Rapid-Air Plus® Alternating Air Floatation Mattress Systems with Gentle Low Air Loss incorporate the features that clinicians demand for their patients in a portable system. The mattress utilizes 18 independent 5.5″ deep air cells to reduce interface pressure for the prevention and treatment of Stages I-IV pressure sore ulcers. User friendly controls and ease of setup make these systems ideal for institutional use and the homebound patient. The mattress is designed to fit all standard hospital beds. |  |
 |
Bladders:
Ventilated bladders include 20 lasered air holes in sacral area to help reduce skin maceration by reducing excess moisture under patient. Air cells are constructed of TPU, thermal polyurethane fabrics. This combination insures strength, durability and patient comfort. The model 4300P Rapid-Air Plus® features a PPF® 2.5” pressure redistribution foam base that protects the patient from bottoming out during power outages. The foam is covered in a medical grade nylon which is anti-microbial and fire retardant. |
|
|
Cover: CPR Valve quickly deflates mattress system for medical emergencies. |
 |
Pump: Alternating mode offers the therapeutic benefit of alternating therapy and reactive hyperemia. This helps to reduce interface pressure well below 32mmHg. Control dial adjusts mattress from soft to firm for patient comfort.Normal Pressure Alert indicates that system is Low Pressure Alert indicates that output needs to be increased for heavier patients or accidental disconnection of hoses. |
 |
Optional blower pump is available to quickly inflate and deflate mattress through CPR valve in under 4 minutes |
|
MODEL 4300
|
Rapid-Air® – Mattress only |
|
Dimensions:
|
35″ x 80″ x 5.5″ |
|
Weight:
|
20 lbs. |
|
Air Cells:
|
18 – 5.5 ” sacs 15 Alternating cells 10 Ventilated cells with 20 lasered air holes 3 Static cells in head section |
|
Mattress Cover:
|
Vyvex-1® – Low shear, moisture/vapor permeable. Removable zippered cover, is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy. |
|
MODEL 4300
|
Rapid-Air®Plus – Mattress only |
|
Dimensions:
|
35″ x 80″ x 8″ (Including foam base) |
|
Weight:
|
20 lbs. |
|
Air Cells:
|
18 – 5.5″ sacs 15 Alternating cells 10 Ventilated cells with 20 lasered air holes 3 Static cells in head section |
|
Mattress Cover:
|
Vyvex-1® – Low shear, moisture/vapor permeable. Removable zippered cover, is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy. |
|
MODEL 4301
|
Rapid-Air® – Pump only | |
|
Dimensions:
|
10″L x 5″W x 4.5″H | |
|
Weight:
|
6.2 lbs. | |
|
Electrical:
|
120V 60 hz | |
|
Listings:
|
UL® 544 Medical Equipment |  |
|
Cycle Time:
|
10 Minutes | |
|
Air Flow:
|
7.5 Liters per minute | |
|
Current Usage:
|
less than 100 micro amps | |
|
Ground Resistance:
|
0.1 ohms maximum | |
|
Power Cord:
|
12 ft. cord | |
|
Construction:
|
ABS fire retartdant UL 94V-0 | |
|
WARRANTY
|
||
|
Pumps:
|
1 Year limited | |
|
Mattress:
|
1 Year limited | |
|
Cover:
|
6 months limited | |
|
ORDERING INFORMATION
|
|
|
Model 4300PLUS
|
Mattress and Pump Control unit 35″ x 80″ x 5.5″ (including foam base) |
|
Model 4300
|
Mattress and Pump Control unit 35″ x 80″ x 5.5″ |
|
Model 4300SRS
|
Mattress with Safety Rail System |
|
Model 4300PM
|
Pediatric Mattress 25″ x 45″ x 3.5″ |
|
Model 4301
|
Pump Control Unit |
|
Model 4320
|
Mattress only |
|
Model 4322
|
Carry Bag with Strap |
|
Model 9623
|
Electric Inflator & Deflator |
|
Model 4324
|
Replacement 5.5″ Ventilated Bladders |
|
Model 4325
|
Replacement 5.5″ Cell Bladders |
|
Model 4326
|
Replacement Zippered Cover |
|
Model 4326
|
Replacement SRS Safety Rail System cover |
| PDAC APPROVED | |
|
Medicare Code EO277
|
