Pre-Vent II Series® Pressure Redistributing Foam Mattress Systems

Prevention by Suspension™

Pre-Vent II Series® Pressure Redistribution Mattress Systems

The Pre-Vent II Series® of therapeutic pressure redistributing foam mattresses is the culmination of extensive research and testing. Blue Chip Medical’s exclusive Sphere™, Reflect™ SCT™ and Multi-Flex™ designs react to body weight displacement across the entire surface. This prevents and relieves pressure sores by keeping the body in a constant state of suspension; Prevention by Suspension™.

Pre-Vent II Series® Pressure Redistribution Mattress Systems

Our unique shapes together with our Med-Flex™ PPF™ foams, react instinctively to a compression set, allowing for a fully automatic, totally zoned surface. Other manufacturers’ surfaces are zone specific and must always take into consideration a patients weight, size (build) and shape. Blue Chip’s Sphere™ and Reflect™ designs act independently as its own self-adjusting, pressure-redistribution zone. Every component of the Pre-Vent II Series® medical foam mattress, undergoes a strict protocol to ensure clinical efficacy, infection control standards and durability for the life of the mattress.


Suspension

  • Tri-Laminate Medical Foam Mattress Design
  • Perfectly matched Med-Flex™ PPF™ foams throughout all layers
  • Fully automatic, totally zoned mattress surface
  • Pressure redistributing foam  Reflect™ SCT™ design top layer
  • Middle layer pressure-redistribution Multi-Flex™ PPF™ design
  • High density Reflect™ bottom layer
  • Exclusive Heel Wrap™ PPF™ foam with Sphere™ design in top layer for maximum prevention of heel ulcers
  • Vyvex III™ multi-stretch, fluid proof top cover
  • Barrier Lok™ infection control system
  • All Med-Flex™ PPF™ foams and cover materials are anti-microbial and fire retardant
  • 8 year non-prorated warranty

Supreme

  • Tri-Laminate Design
  • Perfectly matched Med-Flex™ PPF™ foams throughout all layers
  • Fully automatic, totally zoned mattress surface
  • Pressure-redistribution Reflect™ SCT™ design top layer
  • Exclusive Middle layer pressure-redistribution Multi-Flex™ PPF™ design
  • Exclusive Heel Wrap™ PPF™ foam with Sphere™ design in top layer for maximum prevention of heel ulcers
  • High density Med-Flex™ PPF™ foam bottom layer
  • Vyvex II™ Low shear nylon, fluid proof top cover
  • Barrier Lok™ infection control system
  • All Med-Flex™ PPF™ foams and cover materials are anti-microbial and fire retardant
  • 7 year non-prorated warranty

Elite

  • Tri-Laminate Design
  • Perfectly matched Med-Flex™ PPF™ foams throughout all layers
  • Dual layer exclusive pressure-redistribution Reflect™ SCT™ design
  • High density Med-Flex™ PPF™ foam bottom layer
  • Exclusive Heel Wrap™ PPF™ foam with Sphere™ design in top layer for maximum prevention of heel ulcers
  • Vyvex II™ Low shear nylon, fluid proof top cover
  • Barrier Lok™ infection control system
  • All Med-Flex™ PPF™ foams and cover materials are anti-microbial and fire retardant
  • 6 year non-prorated warranty

Pro

  • Tri-Laminate Design
  • Perfectly matched Med-Flex™ PPF™ foams throughout all layers
  • Exclusive pressure-redistribution Reflect™ top layer
  • Exclusive Heel Wrap™ PPF™ foam incorporated in top Reflect™ SCT™ layer for max. prevention of heel ulcers
  • Med-Flex™ PPF™ foam pressure-redistribution center layer
  • High-density Med-Flex™ PPF™ foam bottom layer
  • Vyvex I™ Low shear nylon, fluid proof top cover
  • Barrier Lok™ infection control system
  • All Med-Flex™ PPF™ foams and cover materials are anti-microbial and fire retardant
  • 6 year non-prorated warranty
COVERS
 
Pre-Vent II Series® Pressure Redistribution Mattress SystemsVyvex-lll™
Vyvex-lll™ is a 4-way stretch urethane coated fabric with a low moisture vapor transmission rate (MVTR). A low MVTR is desired for the benefit of infection
control and the wicking of fluids away from the skin. Vyvex-lll™ is fluid proof and offers low-shear, low-friction protection, is anti-microbial, fire retardant, stain resistant and washable. This cover features Blue Chip’s exclusive Barrier Lok™ infection control system. Vyvex-lll™ is standard on the Suspension Pre-Vent II Series® mattress system and is available as an option on all other models.
Pre-Vent II Series® Pressure Redistribution Mattress SystemsVyvex-ll – Vyvex-l™
Vyvex-ll™ is Nylon Butyl-backed; Vyvex-l™ is a Nylon PVC-backed top cover with a low moisture vapor transmission rate (MVTR). Vyvex-ll™ and Vyvex-l™ are both fluid proof and offer low-shear, low-friction protection and are anti-microbial, fire retardant, stain resistant and washable. This cover features Blue Chip’s exclusive Barrier Lok™ infection control system. Vyvex-ll™ is standard on the Supreme and Elite Pre-Vent II Series® mattress systems. Vyvex-l™ is standard on the Pro Pre-Vent II Series® mattress system.

CORE FOAMS

Med-Flex™ PPF™ (Pressurized Polymer Foaming) Manufacturing Process
PPF™ is the most modern manufacturing process used today. This process uses an enclosed controlled environment rather than a traditional open-line pour. PPF™ allows for the precision control of atmospheric pressures during manufacturing adding to the purity of the foam’s cell structure. This method greatly reduces the sag factor (deflection), thereby enhancing the product’s life and extending the uncompromising pressure-redistributing qualities of our foam mattress systems. PPF™ technology enables Blue Chip to warranty the longevity of our Pre-Vent II Series® mattresses to outlast all other conventional mattress systems.

Pre-Vent II Series® Pressure Redistribution Mattress Systems


SURFACE TECHNOLOGY
Multi-Flex(R) PPF®
Multi-Flex™ PPF™
Multi-Flex™ PPF™ foam provides support for proper immersion and pressure redistribution by utilizing our exclusive compression technology to absorb the patient’s weight, providing ultimate comfort and pressure redistribution throughout the core of the mattress. This design used in conjunction with our Reflect™ SCT™ (Surface Cut Technology) creates the ultimate environment for the prevention and treatment of pressure ulcers.
The Sphere®The Sphere™
The patent-pending anatomically inspired sphere shape offers the most unique design the therapeutic support surface industry has ever seen. The Sphere™ design is clinically effective in redistributes the interface pressures which create pressure sores. Compressing the sphere down expands the surface area into a flat pressure-redistribution surface to evenly distribute and support the patient’s weight across the entire mattress surface. Each Sphere™ acts independently as its own self-adjusting pressure-redistribution zone. As the body moves across the mattress, the spheres’ touch points help stimulate blood flow. The Sphere™ design permits air circulation, reducing heat build-up which provides a much cooler, more comfortable support surface.
Reflect® SCT™ (Surface Cut Technology)
Reflect™ SCT(Surface Cut Technology)
Reflect™ SCT™ foam enables Blue Chip to produce a single piece of polyurethane foam with varying features and properties. We can alter the surface pattern, size, space, position, level and depth of cut. This engineering advancement produces a pressure-redistribution surface that gives unlimited comfort zones never thought possible in a single piece of foam. SCT™ allows the Reflect™ design to be stronger and more supportive with a greater surface area than conventional foam convolution. This design absorbs and distributes the impact-weight of the body to provide greater comfort, maximum support and to redistribute pressure around bony prominences.

FEATURES
Heel Wrap(R) PPF® FoamHeel Wrap(R) PPF® Foam
Heel Wrap™ PPF™ Foam
Exclusive Heel Wrap™ PPF™ foam is incorporated in the top layer of every Pre-Vent II Series® mattress system for maximum prevention of heel ulcers. For years, heel pillows have been buried beneath the top surface of the mattress. Blue Chip’s Heel Wrap™ PPF™ foam was brought to the surface to replace the fiber/foam pillow with individual, self-adjusting, pressure-redistribution zones. Heel Wrap™ PPF™ foam provides a cradle of comfort and support in the sensitive heel area with a softer foam that is more durable than conventional fiber/foam heel pillows.
Sphere™ Heel Wrap™ PPF™ Foam
Reflect™ Heel Wrap™
PPF™ Foam

Barrier Lok(TM) Infection Control System

Barrier Lok™ Infection Control System
Blue Chip’s exclusive Barrier Lok™ feature virtually seals and protects the inner foam core of the mattress by preventing the leaching of fluids from penetrating the perimeter seam of the mattress. The Barrier Lok™ ensures that infection control
standards are maintained, thereby providing investment protection on all Pre-Vent II Series® mattress systems.
Dual-Protection Slip LayerDual-Protection Slip Layer
Our silk film slip layer eliminates friction between the inner foam core and the top cover. This allows both surfaces to move independently against one another extending the life of the mattress. In addition, the special silk film offers added protection against the leaching of fluids to the inner foam core.
Anti-Microbial Protection
All PPF™ foams and Vyvex™ mattress coverings are anti-microbial and effectively protect against bacterial growth. The anti-microbial additive used is proven to be effective against a wide spectrum of micro-organisms, including (MRSA), mold, mildew, staining and odors caused by fungal organisms. CA16 additive for additional protection is available upon request.

ACCESSORIES
Secure Guard(R)
Secure Guard™
Eliminates mattress movement during patient transfers and nursing care. This Multi-purpose accessory allows the mattress to be secured to the bed frame while doubling as a flat sheet hold-down device. Secure Guard™ is an option on all Prevent models.
SRS® - Safety Rail System & PSB®SRS™ – Safety Rail System & PSB™ – Perimeter Safety Bolster
The PSB™ Perimeter Safety Bolster is Standard on all Prevent II Series® Mattress Systems. The SRS™ Safety Rail System can be added to any model to reduce the risk of patient falls. Both systems comply with the new FDA patient entrapment guidelines. Both Systems are made with the same Med-Flex™ PPF™ foam used in the Prevent II Series® Mattresses. SRS™ is a raised side rail system.

SPECIFICATIONS
SUSPENSION
Top Cover:
VyvexIII™ – Urethane coated, multi-stretch, low shear, moisture/vapor permeable, fluid & stain proof. Cover is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy.
Bottom Cover
9oz. Tri-laminate Material
Weight Capacity
Supports 350 lbs.
MEDICARE CODE EO184
WARRANTY: CUSHION
8 Years Non-Prorated
ORDERING INFORMATION
Model BCSS II-3676
36″W x 76″L x 6″H
Model BCSS II-3680
36″W x 80″L x 6″H
Model BCSS II-3684
36″W x 84″L x 6″H

SUPREME
Top Cover:
VyvexII™
Bottom Cover
9oz. Tri-laminate Material
Weight Capacity
Supports 350 lbs.
MEDICARE CODE EO184
WARRANTY: CUSHION
7 Years Non-Prorated
ORDERING INFORMATION
Model BCSP II-3676
36″W x 76″L x 6″H
Model BCSP II-3680
36″W x 80″L x 6″H
Model BCSP II-3684
36″W x 84″L x 6″H

ELITE
Top Cover:
VyvexII™
Bottom Cover
9oz. Tri-laminate Material
Weight Capacity
Supports 350 lbs. – Bariatric up to 1000 lbs.
MEDICARE CODE EO184
WARRANTY: CUSHION
6 Years Non-Prorated
ORDERING INFORMATION
Model BCEL II-3676
36″W x 76″L x 6″H
Model BCEL II-3680
36″W x 80″L x 6″H
Model BCEL II-3684
36″W x 84″L x 6″H
Model BCEL II-4280BAR
42″W x 80″L x 7″H
Model BCEL II-4880BAR
48″W x 80″L x 7″H

PRO
Top Cover:
VyvexI™
Bottom Cover
9oz. Tri-laminate Material
Weight Capacity
Supports 350 lbs.
MEDICARE CODE EO184
WARRANTY: CUSHION
5 Years Non-Prorated
ORDERING INFORMATION
Model BCPR II-3676
36″W x 76″L x 6″H
Model BCPR II-3680
36″W x 80″L x 6″H
Model BCPR II-3684
36″W x 84″L x 6″H
***Visco-elastic foam can be added to any mattress style, please specify when ordering.

Flammability Information
All Pre-Vent II Series® Mattress Systems meet federal flammability standard 16 CFR 1632, as well as flame-retardancy specifications stated in California Technical Bulletin #117. All mattresses can be ordered with a special upgraded fire barrier protection to meet flame retardancy specifications. This includes California Technical Bulletin #121, #129, City of Boston 1X-11 and 1633.

* Pre-Vent II Series® Mattress Systems will support patients weighing up to 350 lbs.
** Bariatric sizes for patients weighing up to 650 lbs., Custom bariatric sizes available for patients weighing up to 1000 lbs.
Available in Elite system only. Please specify bed dimensions and patient’s weight.
*** All Pre-Vent II Series mattresses are available in an Eco-Friendly “Green” option.

All foams and cover materials are anti-microbial.