Rapid-Air™ Mattress System- Model 4300
The Rapid-Air® Alternating Air Floatation Mattress System with Low Air Loss

The Rapid-Air® Alternating Air Floatation Mattress System with Low Air Loss
incorporates the features that clinicians demand for their patients in a portable system. The mattress utilizes 18 independent 5.5" deep air cells to reduce interface pressure for the prevention and treatment of Stages I-IV pressure sore ulcers. User friendly controls and
ease of setup make Rapid-Air® ideal for institutional use and the home bound patient. The mattress was designed to fit all standard hospital beds.

Bladders:
Ventilated bladders include 20 lasered air holes in sacral area to help reduce skin maceration by reducing excess moisture under patient. Air cells are constructed of laminated medical grade nylon and TPU, thermal polyurethane fabrics. This combination insures strength, durability and patient comfort.

Cover:
Vyvex-I® nylon cover transfers moisture away from patients skin. The cover is low shear, washable, anti-microbial, fluid resistant and fire retardant. Cover is loose fitting and will conform to the patient.
CPR Valve quickly deflates mattress system for medical emergencies. A simple twist, releases the air immediately. This multi-purpose CPR Valve
can be used to inflate or deflate the mattress with our optional blower pump.
Pump:
Alternating mode offers the therapeutic benefit of alternating therapy and reactive hyperemia. This helps to reduce interface pressure well below 32mmHg.

Control dial adjusts mattress from soft to firm for patient comfort.

Normal Pressure Alert indicates that system is
operating correctly.

Low Pressure Alert indicates that output needs to be increased for heavier patients or accidental disconnection of hoses.
The optional blower pump can inflate or deflate the mattress through the multi-purpose CPR valve in under four minutes. This reduces waiting time for therapeutic treatment to begin.
MODEL 4300 Rapid-Air® - Mattress only
Dimensions: 35" x 80" x 5.5 "
Weight: 20 lbs.
Air Cells: 18 - 5.5 " sacs
15 Alternating cells
10 Ventilated cells with 20 lasered air holes
3 Static cells in head section
Mattress Cover: Vyvex-1® - Low shear, moisture/vapor permeable. Removable zippered cover,
is anti-microbial and meets California Technical
Bulletin #117 for fire-retardancy.
MODEL 4301 Rapid-Air® - Pump only
Dimensions: 10L" x 5W" x 4.5H"
Weight: 6.2 lbs.
Electrical: 120V 60 hz
Listings: UL® 544 Medical Equipment
Cycle Time: 10 Minutes
Air Flow: 7.5 Liters per minute
Current Usage: less than 100 micro amps
Ground Resistance: 0.1 ohms maximum
Power Cord: 12 ft. cord
Construction: ABS fire retartdant UL 94V-0
WARRANTY
Pumps: 1 Year limited
Mattress: 1 year limited
Cover: 6 months limited
ORDERING INFORMATION  
Model 4300 Mattress and Pump Control unit
Model 4300P Pediatric Mattress and Pump Control unit
Model 4300RAP Mattress with Optional Foam Base and Pump Control unit
Model 4301 Pump Control Unit
Model 4320 Mattress only
Model 4322 Carry Bag with Strap
Model 4323 Electric Inflator & Deflator
Model 4324 Replacement 5.5" Ventilated Bladders
Model 4325 Replacement 5.5 " Cell Bladders
Model 4326 Replacement Zippered Cover
Model 4327 Replacement Fitted Cover
SADMERC APPROVED
Medicare Code EO277  

Back to Mattress Overlay Systems