Wheelchair Position Cushion Skin Protection and Position Cushion

The Gel Pro™ Position Plus™ Gel & Foam Wheelchair Position Cushion provides the most advanced pressure redistribution, therapeutic support and positioning available. The Gel Pro™Position Plus™ Gel Position Cushion allows therapists to offer correct posture, proper spinal alignment, trunk stability and all the pressure redistribution characteristics required for a seating application. All cover
materials are anti-microbial and meet California Technical Bulletin #117 for fire retardancy. An optional solid seat insert is available.The front abduction wedge maintains proper midline alignment and reduces internal rotation of the hips in addition to preventing sliding and shearing forces.
Gel Pro Position Cushion and Skin Protection
Cover: The Vyvex III™ top cover is a low shear, four-way stretch urethane, which is fluid and stain proof. The bottom cover is a non-skid tri-laminate vinyl.
Gel Pro Position Cushion Gel Bladder
The cushion’s top layer is Viscotec™, a heat activated visco elastic memory foam which surrounds and supports the bony prominences while redistributing pressure.
Viscotec, Visco Elastic Memory Foam
Core:Top: Viscotec™ Memory FoamCenter:VPF™ High Density Foam Ultra-Soft Viscous Gel BladderBase: Medflex™ VPF™ High Density FoamThe middle layerThe middle layer is VPF™, a high density pressure redistribution foam, encapsulating an ultra soft viscous gel bladder further enhancing pressure redistribution.A Medflex™ foam base provides the
necessary foundation to ensure that the patient maintains the proper stability,
support and correct spinal alignment
MODEL 6250
Gel Pro Position Plus™ Gel & Foam Wheelchair Position Cushion
Dimensions:
17″ x 17″
Zippered Top Cover:
Vyvex-III™ – Urethane coated, multi-stretch, low shear, moisture/vapor permeable, fluid & stain proof. Cover is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy.
Bottom Cover:
Non-skid tri-laminate vinyl
Weight Capacity
Supports 250 lbs.
WARRANTY
Cushion:
18 month
ORDERING INFORMATION
Model 6250NA
16″ x 16″
Model 6250
17″ x 17″
Model 6250A
18″ x 16″
Model 6250FA
20″ x 16″
Model 6250VFA
22″ x 16″
Model 6250VVFA
24″ x 16″
Model 6250C
18″ x 18″
Model 6250CC
20″ x 18″
Model 6250CCFA
22″ x 18″
Model 6250CCVFA
24″ x 18″
Model 6250D
20″ x 20 “
Custom and bariatric sizes available. Please state patient’s weight when ordering
SADMERC APPROVED
Medicare Code E2607
22″ Less than 22″ Width
Medicare Code E2608
22″ Width or Greater


Pro Positioner™ – Model 6240
Skin protection and position cushion

Pro Positioner™ Wheelchair Position Cushion provides the most advanced pressure redistrubution therapeutic support and positioning available. The Pro Positioner™ Cushion allows therapists to offer correct posture, proper spinal alignment, trunk stability and all the pressure redistribution characteristics required for a seating application.The front abduction wedge maintains proper midline alignment and reduces internal rotation of the hips in addition to preventing sliding and shearing forces.Pro Position Cushion and Skin Protection
Cover: The Vyvex-III™ top cover is a low shear, four-way stretch urethane, which is fluid and stain proof. The bottom cover is a non-skid tri-laminate vinyl.
Pro Positioner Layered Foam Position & Skin Protection
The cushion’s top layer isViscotec™, a heat activated visco elastic foam which surrounds andsupports the bony prominences while redistributing pressure.
Viscotec Visco Elastic Memory Foam
Core:Top: Viscotec™ Memory FoamCenter:VPF™ High Density FoamBase: Medflex™ VPF™ High Density FoamThe middle layer is VPF™, a high density
foam fo superior pressure redistribution.A Medflex™ foam base provides the
necessary foundation to ensure that the patient maintains the proper stability,
support and correct spinal alignment
All foams and cover materials are anti-microbial and meet California Technical Bulletin #117 for fire retardency.
MODEL 6240
Pro Positioner™ Foam Wheelchair Position Cushion
Dimensions:
17″ x 17″
Zippered Top Cover:
Vyvex-III™ – Urethane coated, multi-stretch, low shear, moisture/vapor permeable, fluid & stain proof. Cover is anti-microbial and meets California Technical Bulletin #117 for fire-retardancy.
Bottom Cover:
Non-skid tri-laminate vinyl
Weight Capacity
Supports 250 lbs.
WARRANTY
Cushion:
18 Month Limited
ORDERING INFORMATION
Model 6240NA
16″ x 16″
Model 6240
17″ x 17″
Model 6240A
18″ x 16″
Model 6240FA
20″ x 16″
Model 6240VFA
22″ x 16″
Model 6240VVFA
24″ x 16″
Model 6240C
18″ x 18″
Model 6240CC
20″ x 18″
Model 6240CCFA
22″ x 18″
Model 6240CCVFA
24″ x 18″
Model 6240D
20″ x 20 “
Custom and bariatric sizes available. Please state patient’s weight when ordering
SADMERC APPROVED
Medicare Code E2607
22″ or Less
Medicare Code E2608
22″ or Greater
  • NEW PRODUCTS

  • CONTINUING EDUCATION PROGRAM

    Continuing Education Units
  • FOR CLINICAL OR TECHNICAL ASSISTANCE

    Medical Professionals & Dealers
    CALL 800 795-6115

    For technical assistance or help choosing the correct product for your specific application.
  • UPCOMING 2017 SHOW

    SouthEast WOCN
    September 28 - 30, 2017
    Knoxville, TN

    MidAtlantic WOCN
    October 13 - 14, 2017
    Holiday Inn, Fredrick, Maryland

    NorthEast WOCN
    Redding PA
    Date and Time to be announced

  • RECENT ARTICLES